White Pages Snap White Pages

Sometimes, due to environmental or application needs, it is necessary to configure the printing temperature and/or speed. For Zebra printers you can operate in two ways: If you use the Zebra Designer software you can click on the arrow next to the "Print" button and then on "Printer Settings . ...
Read all

Reset and reconfigure Datalogic QuickScan QM2100, QM2130 devices   Proceed by downloading the guide to the following link tp RESET the device to the Factory Default Settings Pringt page 18 of the manual Scan the barcode corresponding to RESTORE EU FACTORY CONFIGURATION (For the Cordless version): place the device in the cradle      
Read all

How to set PREFIX on Datalogic Magellan 1100i barcode scanners   Download the manual at the following link   Configuring prefixes: in case you need to put a character before the barcode read, the Datalogic Magellan 1100i device allows you to configure up to 20 ASCII characters   Example: configuration of the character $ (dollar, corresponding to the ASCII code 24) as a prefix Print pages 61 and 178 of the aforementioned manual READ THE BAR CODES IN SEQUENCE: ENTER/EXIT PROGRAMMING MODE SET PREFIX  Read the barcode corresponding to the number 2 (pag 178) Read the barcode corresponding to the number 4 (pag 178) ENTER/EXIT PROGRAMMING MODE to confirm the character ENTER/EXIT PROGRAMMING MODE to exit programming mode For different characters, refer to the ASCII table on page 199
Read all

How to convert UPC to EAN on Datalogic Gryphon I GD41x0 / GM41x0 / BT4100 / L GD4300 This configuration is necessary when there is a need to prefix the digit 0 with the barcode read; Generally, this happens with UPC-A and UPC-E barcodes, the first digit (nationality code) is omitted because the encoding is generally used in the United States. Download the manual at the following LINK   Print page 111 (113 of pdf) and read in sequence:   Enter/exit Programming mode UPC-A to EAN13 = Expand Enter/exit Programming mode             Print page 114 (116 of pdf) and read as before: Enter/exit Programming mode UPC-E to EAN13 = Expand Enter/exit Programming mode
Read all

Device timeout configuration guide: The Datalogic Magellan 800i Scanner is factory configured to enter "sleep mode" after 5 minutes of inactivity To change this time or disable the suspend function, follow the istructions below.   Download the manual at the following link   Distable the stand-by Print page 11 and scan in sequence the following barcodes: - Enter/Exit Programming Mode - Disable Sleep Mode - Enter/Exit Programming Mode   Change Standby time Print page 11 and scan in sequence the following barcodes: - Enter/Exit Programming Mode - read the barcode corresponding to the desired time - Enter/Exit Programming Mode  
Read all

  Download User guide following this link Print pages 8-43, 8-44; then scan the following barcodes -  Enable interleaved 2 of 5 - "i 2 of 5 - Any Lenght"       
Read all

Evolis Badgy 100 - Evolis Badgy 200 HOW TO clean the printer Printer cleaning The parent company recommends cleaning the machine once a year, and in any case it is recommended to carry out more frequent cleaning cycles in case of intensive use or exposure to dusty environments.   Roller cleaning with the "T card" The T card is a special card (you can buy it here) impregnated with a solvent dedicated to cleaning the rollers. ...
Read all

The Code 32 simbology is a particular variation of the Code 39 one. To enable this kind of simbology on the Zebra LI4278 scanner, referring to the following manual, you need to: At page 11-28 of the manual (238 of the pdf) read the barcode Enable Code 39 (which should be the default setting) At page 11-29 of the manual (239 of the pdf)read the barcode Enable Convert Code 39 to Code 32
Read all